Pine Harbor Shed Co.
Shed Kit Assembly

Items Not Supplied with Shed Kit

Tape measure
Level
Hammer
Saw (hand or circular)
Screwdriver or screw gun (phillips head)
Utility knife

• 10 lbs. 12d or 16d spikes for floor framing and shed frame
• 15 lbs. 8d common for plywood, boarding, and trim
• 5 lbs. 1 1/4" box nails for battens
• 5 to 7 lbs. 1" roofing nails for roof shingles

Tar paper after plywood on roof (optional) acts as temporary cover until roofing is applied.

• 2" #12 phillips 10 screws/door or 5/hinge
• 1" #8 phillips for hasp 8/hasp assembly